Articles uploaded in MyJurnal |
|
|
View Article |
Separation of CO2 by using aqueous mixtures of AMP and [B3MPYR][BF4] at high pressure
Syamila Nordin1, Ruzita Mohd Salleh2, Norhuda Ismail3.
In this study, CO2 absorption capacity in aqueous mixtures of 2-amino-2-methyl-1-propanol, (AMP) and N-butyl-3-methylpyridinium tetrafluoroborate, [B3MPYR][BF4] was measured at pressures from 200 kPa up to 5000 kPa and temperatures of 303.15 K - 333.15 K. The AMP concentration was maintained at 1 M while the [B3MPYR][BF4] concentration ranges from 0.05 M to 0.3 M. It was observed that CO2 loading capacity increases when the pressure increased. However, increasing of temperature will decrease the CO2 loading. From the experimental results, a simple correlation, as suggested by Jou and Mather was used to predict the CO2 loading in the aqueous AMP-[B3MPYR][BF4] mixtures. The model were found to be in a good agreement with the experimental results where only 1.66% of the predicted values deviate more than 20% compared to the experimental values.
Affiliation:
- Universiti Teknologi MARA, Malaysia
- Universiti Teknologi MARA, Malaysia
- Universiti Teknologi MARA, Malaysia
Download this article (This article has been downloaded 136 time(s))
|
|
Indexation |
Indexed by |
MyJurnal (2021) |
H-Index
|
6 |
Immediacy Index
|
0.000 |
Rank |
0 |
Indexed by |
Scopus 2020 |
Impact Factor
|
CiteScore (1.4) |
Rank |
Q3 (Engineering (all)) |
Additional Information |
SJR (0.191) |
|
|
|
|
|